Authorized seller in Germany, ensuring genuine products and trusted services.
X-ray source RS 40B1
High intensity twin anode Al/Mg source optimized for XPS and high pressure XPS experiments.
- Description
- Technical Data
- Features
- Options
Description
Design of the anode, filament and source housing guarantees maximum X-Ray intensity and very low crosstalk between the anode faces.
A specially configured nose cone allows maximum access to the sample. Twin anode used in standard source, allows for separated emission of two different characteristic X-radiation emission lines: Mg (1253 eV), Al (1487 eV) – other coating materials on request.
| Mounting flange | DN 40CF (non-rotatable) |
| Anode | Al/Mg (other materials on request) |
| Power | Al 600 W / Mg 400 W |
| Energy range | 7 – 15 keV |
| Cathode current (Icath) | up to 2.5 A |
| Emission current range (Ie) | 0 – 50 mA |
| Cross talk | < 0.35 % |
| Magnetic field at sample | below 0.5 μT |
| Increased sample temperature | < 5 °C |
| Cathode type | thoriated tungsten |
| Water cooling | required, pressure 3.5 – 5 bar (max. 6 bar), flow ≥ 2.5 l/min., Tmax = 30 °C |
| Insertion length | 285 mm; OD: 35 mm |
| FWHM | dependent on working distance (e.g. 30 mm for distance 15 mm) |
| Typical working distance | 5 – 30 mm (optimum 15 mm) |
| Bakeout temperature | up to 250 °C |
| Working pressure | < 5 x 10-6 mbar |
- High intensity twin anode Al / Mg
- Specially configured nose cone
- Very low cross-talk
- Low magnetic field
- Hermetically sealed housing
- Very efficiently water-cooled inner housing in order to reduce thermal damage to the sample during operation
- In-built double high voltage protection together with hermetically sealed housing
- Able to work in high pressure experiments in the mbar range (option)
- Able to work under full control with limited water flow.
- HP version, up to 20 mbar
- Linear shift with tilt 50 – 100 mm (for HP X-ray source equipped with additional pumping port)
- Chiller
