Authorized seller in Germany, ensuring genuine products and trusted services.
HPT-100 & HPT-200
The HPT-100 & HPT-200 are microprocessor controlled benchtop plasma treatment systems that are ideally suited to surface activation, cleaning and modification of a wide range of materials including polymers, metals, glass and ceramics.
- Description
- Process Results
- Plasma Environment
- Benefits
- Specification
- Downloads
Description
Available in fixed, single, or dual gas inlet versions and with onboard gas mixing manifold, the HPT-100/200 systems are able to handle a wide range of gases for optimised treatments, including air, oxygen, hydrogen, argon, nitrogen and many others.
An optional vapour delivery inlet extends the use to liquid precursors and a corrosion-resistant version expands the choice even further to address specific material treatments including;
- Plasma cleaning
- Plasma surface activation to improve adhesion
- Functional plasma coatings
- Plasma etching
- PDMS & microfluidic devices
- PEEK & other engineering polymers
- PTFE
- Metals
- Ceramics
- Glass & optical devices
TFT Colour touchscreen
Each system is supplied with a 5.7-inch colour touchscreen which provides a rich, user-friendly interface. Variables such as gas flow rate, pressure, power level and plasma processing time can be freely set and then stored to produce a fully interlocked process cycle from a single keypress. A handy status display and end of process audible alarm informs the user of every step in the process.
Plasma Cleaning Example
- Material : HDPE
- Air plasma
- 90 seconds
Vacuum chamber & power
The HPT-100 system features a 100mm diameter plasma process chamber in stainless steel with vacuum compatible materials throughout.
The HPT-200 features a larger capacity 150mm diameter plasma process chamber to accomodate more samples or larger samples.
Henniker’s proprietary, high stability HPS plasma generator is continuously variable over the entire 0-100W/0-200W power range rather than being limited to discreet levels, delivering much finer control when processing delicate materials.
Versatility
Each system has a range of gas inlet options to suit budget and application; fixed, single MFC, dual MFC and vapour delivery. The units can be prepared so that either option can be added at a later time if required, ensuring that future requirements can be accommodated without expensive reconfiguration.
Repeatable and ReliableWith precision flow control and integrated pressure gauge, the 100 & 200 models deliver unmatched reliability & repeatability by removing common errors in gas flow and gas type settings which will be familiar to users of equivalent equipment that utilise manual needle valves.
Benefits
|
|
Technical Specifications |
||||||
| HPT-100 / HPT-200 Plasma Treatment Systems | ||||||
| ENCLOSURE | ||||||
| Dimensions | HPT-100 / HPT-200 – W 520mm x H 286mm x L 550mm (+50mm on rear for cables) | |||||
| Weight | HPT-100 – ~22kg
HPT-200 – ~23kg |
|||||
| CHAMBER | ||||||
| Material | Stainless Steel | |||||
| Form | Cylindrical | |||||
| Dimensions | HPT-100 – 100mm dia. x 280mm L
HPT-200 – 150mm dia. x 280mm L |
|||||
| REMOVABLE PARTS CARRIER | ||||||
| Material | Aluminium | |||||
| Material options | Stainless steel | |||||
| Form | Flat tray | |||||
| Form options | Perforated tray, others to suit application | |||||
| Dimensions | HPT-100 – 90mm W x 255mm L, others to suit application
HPT-200 – 135mm W x 255mm L, others to suit application |
|||||
| PLASMA POWER SUPPLY | ||||||
| Power | HPT-100 – 0-100W, continuously variable output
HPT-200 – 0-200W, continuously variable output |
|||||
| Frequency | 40 kHz | |||||
| PROCESS CONTROL | ||||||
| Interface | 5.7” Colour TFT with recipe store | |||||
| Gas channel options | Fixed, x1 MFC or x2 MFC and x1 vapour inlet options | |||||
| Vent inlet | x1 | |||||
| Vent inlet options | soft ventilation option | |||||
| Connections | 6mm compression or 1/4″ compression | |||||
| Process timer | 1sec – 99.59min | |||||
| Recipe Store |
Stores up to 4 x recipes – with individual parameters | |||||
| Pressure gauge | Pirani sensor | |||||
| Vacuum pump | 3 to 6 m3/hr pumping speed | |||||
| Vacuum pump options | 2-stage rotary pump (air/inert gas), PFPE rotary pump (oxygen compatible), dry pumps. All pumps include exhaust filter and connections | |||||
| SERVICES | ||||||
| Electrical | 90-250 VAC, 50-60Hz, 1200-1500 VA (including pump), fused 6.3 A T / 10 A T | |||||
| Power cord | Suited to region | |||||
| Compliance | CE – UKCA – ROHS – WEEE | |||||
| **Henniker strive for continuous improvement and specifications are subject to change without notice | ||||||
HPT-100 FI Product Brochure
The HPT-100 FI is an entry level low cost microprocessor-controlled benchtop plasma treatment system for surface activation and cleaning to improve adhesion.
HPT-100 Product Brochure
The HPT-100 is a microprocessor-controlled benchtop plasma treatment system delivering out of the box reliability and repeatability and with a wide range of options.
HPT-200 Product Brochure
The HPT-200 is a microprocessor-controlled benchtop plasma treatment system delivering out of the box reliability and repeatability and with a wide range of options.
